John Deere, Massey Ferguson, Husqvarna, and more


Tractor Parts and Replacement - John Deere, Massey Ferguson, Husqvarna, and more.Hard to beat prices of lathe-clamp and comparable items. Browse Lathe-clamp in stock and ready to ship now online!

Lathe Clamp

Trying to find John Deere Tractor for sale online? Trying to find Lathe Clamp or other relevant listings? This website displays an ample array of Lathe Clamp, plus items such as Massey Ferguson, Baler, Front Loader, Zero Turn, and lots extra. Shop our enormouse collection, or try a search for a particular Lathe Clamp using the site search. This site has access to thousands of items from online sellers, so our site just might have what you're trying to locate! Buy Lathe Clamp here!

12 Inch Smw Tx-rv Hydraulic Lathe Chuck - $2700.00

12 Inch Smw Tx-rv Hydraulic Lathe Chuck

12 Inch Smw Autoblok Tx-rv Hydraulic Lathe Chuck. This Came Off A Running Machine, And Is In Good Working Condition. The Chuck Will Include A Custom Locator, 1 Set Of Custom Id Jaws, And An A2-11 Spindle Nose Adapter Plate. Thanks For Looking! Serial #178


New Kitagawa Lathe Chuck B 210x 10 3 Jaw A2-8 M88x20 Thread - $2390.00

New Kitagawa Lathe Chuck B 210x 10 3 Jaw A2-8 M88x20 Thread

New, Never Used, Was Taken Off New Mazak Lathe And Replaced By 12" Chuck. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M88 Thread If You.


New Kitagawa Lathe Chuck Bb210 A2-8 M90 P2 Thread - $2500.00

New Kitagawa Lathe Chuck Bb210 A2-8 M90 P2 Thread

M90 P2.0 Drawtube Adapter Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M90 Thread If You. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck.


Rebuilt Kitagawa S1875-21 Hydraulic Cylinder Actuator For Cnc Lathe Chucks1875 - $2100.00

Rebuilt Kitagawa S1875-21 Hydraulic Cylinder Actuator For Cnc Lathe Chucks1875

This Cylinder Is Interchangeable With The S1875. I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. (40 Kgfcm Squared). Cylinder Had A Complete Rebuild Consisting Of.


A2-8 Lathe Spindle Collet Nose Hardinge S30 Master 21 Sets Of Collet Pads - $2499.00

A2-8 Lathe Spindle Collet Nose Hardinge S30 Master 21 Sets Of Collet Pads

Includes Hardinge S30 Cone Master Collet. Hardinge 2-34" Serrated. Hardinge 2-12". Hardinge 1-78". Hardinge 1-34". Hardinge 1-516". Hardinge 1". Hardinge 58".


12-12 Bison 6 Jaw Set Tru Lathe Chuck - $2425.00

12-12 Bison 6 Jaw Set Tru Lathe Chuck

Whether Scroll, Independent Or Collet, These Chucks Have Been Replacing The Competitions For The Last 30 Years Without Sacrificing Production. 12-12" Bison Chuck 6 Jaw "settru" Fine Adj Lathe Chuck.


New Bison Poland 12-12 4-jaw Independent Steel Lathe Chuck A6 Mount 3146 - $2450.00

New Bison Poland 12-12 4-jaw Independent Steel Lathe Chuck A6 Mount 3146

New Bison Poland 12-12" 4-jaw Independent Steel Lathe Chuck. A6 Mount. A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. The Unit Is Shiny And New But We Had A Hard Time Getting The Light Right . Please See Additional Pictures Below The Description. 4-jaw Steel Body Independent Chucks "a" Type Direct Mount with American Standard 2 Pc. Top Jaws Please See Additional Pictures Below The Description.


12 Inch Smw 320-te 222 6 Jaw Hydraulic Lathe Chuck - $2700.00

12 Inch Smw 320-te 222 6 Jaw Hydraulic Lathe Chuck

12 Inch Smw Autoblok Tx-rv Hydraulic Lathe Chuck. This Came Off A Running Machine, And Is In Good Working Condition. This Style Is A 6 Jaw Centralizing Design, Very Good For Maintaining A Tight Roundness Tolerance. The Chuck Will Include A Custom Locator, 1 Set Of Custom Id Jaws (looks Like They Hold About 7.5" Diameter) And An A2-11 Spindle Nose Adapter Plate. Thanks For Looking! Serial# 21


Samchully Sh-15052 Cc-du Hydraulic Cylinder Actuator For Lathe Power Chuck - $2600.00

Samchully Sh-15052 Cc-du Hydraulic Cylinder Actuator For Lathe Power Chuck

Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder. Smw Autoblok Cylinder. Lmc Cylinder.


New Bison 12 3-jaw Steel Lathe Scroll Chuck D11 D-11 Direct Mount 3148 List - $2250.00

New Bison 12 3-jaw Steel Lathe Scroll Chuck D11 D-11 Direct Mount 3148 List

New Bison 12" 3-jaw Steel Lathe Scroll Chuck. D11 Direct Mount. Bison Part Number 3545-12"-11. Made In Poland D Type Direct Mount - No Need For Machining And No Backplate Required Designed To Grip Round Work Pieces All Forged Steel Bodies 2pc Hard Reversible American Standard Tongue And Groove Jaws Are Made Of High Quality Alloy Then Hardened And Ground Operating Screws Are Hardened And Ground Please See Additional Pictures Below The Description.


Bison 6 Jaws 10 Diam Self Centering Manual Lathe Chuck - $2537.66

Bison 6 Jaws 10 Diam Self Centering Manual Lathe Chuck

Bison 6 Jaws, 10" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 1,900 Max Rpm, 2.992" Through Hole Diam, Forged Steel


Rebuilt Kitagawa F1768h Hydraulic Cylinder Actuator For Cnc Lathe Chuck - $2500.00

Rebuilt Kitagawa F1768h Hydraulic Cylinder Actuator For Cnc Lathe Chuck

I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. Cylinder Had A Complete Rebuild Consisting Of (40 Kgfcm Squared).


Watchmakers Lathe By G Boley 8mm Original Box Numerous Collets And Parts - $2200.00

Watchmakers Lathe By G Boley 8mm Original Box Numerous Collets And Parts

By G Boley 8mm. Original Box.


Tonfou Ton Fou Rcs-10 Hydraulic Cylinder Actuator For Lathe Power Chuck - $2400.00

Tonfou Ton Fou Rcs-10 Hydraulic Cylinder Actuator For Lathe Power Chuck

Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder. Smw Autoblok Cylinder. Lmc Cylinder. Complete With Everything In Photos, No Box.


Kitagawa Ss2110c15y Hydraulic Cylinder Chuck Actuator For Cnc Lathe - $2250.00

Kitagawa Ss2110c15y Hydraulic Cylinder Chuck Actuator For Cnc Lathe

Compact Hydraulic Cylinder With Max Speed Of 3500 Rpm. Draw Bar Pull (kn) 71.0. Max Pressure (mpa) 3.5.


New Kitagawa Lathe Chuck Bb210 A2-8 M90 P2 Thread - $2700.00

New Kitagawa Lathe Chuck Bb210 A2-8 M90 P2 Thread

M90 P2.0 Drawtube Adapter Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M90 Thread If You. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck.


Bison 6 Jaws 8 Diam Self Centering Manual Lathe Chuck - $2219.17

Bison 6 Jaws 8 Diam Self Centering Manual Lathe Chuck

Bison 6 Jaws, 8" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 2,200 Max Rpm, 2.165" Through Hole Diam, Forged Steel


Royal Heavy Duty Cnc Lathe Bar Puller Model 43400 1 Round Shank Range 18-2 14 - $2149.10

Royal Heavy Duty Cnc Lathe Bar Puller Model 43400 1 Round Shank Range 18-2 14

Royal Heavy Duty Cnc Lathe Bar Puller Model 43400 1" Round Shank Range 18-2 14


New Seoam Cah-10 Lathe Chuck M76 P15 Thread A2-8 Kitagawa B-210 - $2100.00

New Seoam Cah-10 Lathe Chuck M76 P15 Thread A2-8 Kitagawa B-210

Seoam Lathe Chuck Cah-10, 10" 3 Jaw Power Chuck, New, Never Used. Seoam Is Owned By Hwacheon Machine Tool Which Produces Quality Cnc Lathes. For Usa Dealer And Tech Support On Seoam Chucks M76 P1.5 Drawtube Nut Thread Size.


Cushman203 Jaw Hydraulic Lathe Chuck Chuck20-74618-a11a Wbacking Plate Unused - $2500.00

Cushman203 Jaw Hydraulic Lathe Chuck Chuck20-74618-a11a Wbacking Plate Unused

Appears Unused Still Has Factory Cosmoline All Over Please See Pics For Condition Local Pickup Or Your Arranged And Paid Shipping


New Kitagawa Lathe Chuck B 210x 10 3 Jaw A2-8 M88x20 Thread - $2490.00

New Kitagawa Lathe Chuck B 210x 10 3 Jaw A2-8 M88x20 Thread

New, Never Used, Was Taken Off New Mazak Lathe And Replaced By 12" Chuck. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M88 Thread If You.


New Kitagawa Lathe Chuck Bb08 8 M74 X P 20 Thread A2-6 Kitagawa Bb208 - $2100.00

New Kitagawa Lathe Chuck Bb08 8 M74 X P 20 Thread A2-6 Kitagawa Bb208

M74 X P2.0 Thread In Draw Tube Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M74 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


Smw-autoblok Tsf-c 315 124 Three Jaw Lathe Chuck Pull Back Action - $2500.00

Smw-autoblok Tsf-c 315 124 Three Jaw Lathe Chuck Pull Back Action

Smw-autoblok Tsf-c 315 (12.4") Three Jaw Chuck, Pull Back Action. Pull Down Three Jaw Chuck. Model Tsf-c 315. Reassembled And Greased By A Qualified Chuck Service Man.


Lot Of 2 Smw Autoblok 16 400mm 400-nt Hydraulic Lathe Power Chucks - $2200.00

Lot Of 2 Smw Autoblok 16 400mm 400-nt Hydraulic Lathe Power Chucks

Lot Of (2) Smw 16 400-nt Hydraulic Lathe Power Chucks. These Units Are In Good Condition But Have Some Surface Rust, Wear, And Grime. You Get Both Chucks Pictured With No Other Accessories, Jaws, Or Attachments. They Come Exactly As Seen Pictured. See All Photos To Be Sure Of What Youre Getting And For The Best Idea Of Item Condition. Local Pickup In Woodruff, Sc. I Can Help Facilitate With Freight Shipping.


New Kitagawa Lathe Chuck Br08 M74 X P2 Thread A2-6 - $2600.00

New Kitagawa Lathe Chuck Br08 M74 X P2 Thread A2-6

M74 P2.0 Drawtube Adapter Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M74 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


Rebuilt Kitagawa F1768hs-15y Hydraulic Cylinder Actuator For Cnc Lathe Chuck - $2500.00

Rebuilt Kitagawa F1768hs-15y Hydraulic Cylinder Actuator For Cnc Lathe Chuck

I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. Cylinder Had A Complete Rebuild Consisting Of (40 Kgfcm Squared).


Samchully Mh-210vi 3 Jaw Lathe Chuck M90 P2 Thread A2-8 Kitagawa Bb-210 - $2400.00

Samchully Mh-210vi 3 Jaw Lathe Chuck M90 P2 Thread A2-8 Kitagawa Bb-210

Samchully 3 Jaw Power Lathe Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M90 Thread If You. M 90 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


New Delta 46-460 12-12 In Variable Speed Midi-lathe - $2579.95

New Delta 46-460 12-12 In Variable Speed Midi-lathe

Delta 46-460 12-12 In. Variable Speed Midi-lathe! Variable Speed Midi-lathe. Type Wood Lathe. Forward And Reversing Function Allows The Turner To Achieve A Superior Finish. With The Delta 46-460 It Is A Simple Flip Of The Switch.


New Bison Poland 12 4-jaw Independent Steel Lathe Chuck A2-8 Mount 3435 - $2576.00

New Bison Poland 12 4-jaw Independent Steel Lathe Chuck A2-8 Mount 3435

New Bison Poland 12" 4-jaw Independent Steel Lathe Chuck. A2-8 Mount 4-jaw (2 Pc) Forged Steel 12 A-8, 3.15 Hole Please See Additional Pictures Below The Description.


Buck-forkardt 10 2-3 Jaw Power Lathe Chuck New Chuck - $2600.00

Buck-forkardt 10 2-3 Jaw Power Lathe Chuck New Chuck

Parts Available Through Buck Chuck. A2-8 Spindle Adapter Plate. New Chuck, Never Used.


Kitagawa N-15 15 3 Jaw Lathe Chuck A2-11 Spindle Mount - $2100.00

Kitagawa N-15 15 3 Jaw Lathe Chuck A2-11 Spindle Mount

A2-11 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man. Ready To Run.


New Kitagawa Lathe Chuck Bb-208 8 M72 P15 Thread A2-6 Samchully Mh 08 - $2400.00

New Kitagawa Lathe Chuck Bb-208 8 M72 P15 Thread A2-6 Samchully Mh 08

M72 P1.5 Thread In Draw Tube Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M72 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.


Hardinge Lathe - $2600.00

Hardinge Lathe

Made In Usa.


Smw Omnirest Em21 78 To 393 Cap Good Used Steady Rest From Mazak Cnc Lathe - $2100.00

Smw Omnirest Em21 78 To 393 Cap Good Used Steady Rest From Mazak Cnc Lathe

Smw Em2.1 Omnirest Turn Through Hydraulic Steady Rest. Had Been Used On Mazak Cnc Lathe, We Do Not Have The Mounting Plate. Approx 70 Lbs.


New Bison Poland 12 4-jaw Independent Steel Lathe Chuck Plain Back 2994 - $2250.00

New Bison Poland 12 4-jaw Independent Steel Lathe Chuck Plain Back 2994

New Bison Poland 12" 4-jaw Independent Forged Steel Lathe Chuck. Plain Back. 2 Pc Top Jaws. Part Number 4307-12 Please See Additional Pictures Below The Description.


12 Inch Smw Tx-rv Hydraulic Lathe Chuck - $2700.00

12 Inch Smw Tx-rv Hydraulic Lathe Chuck

12 Inch Smw Autoblok Tx-rv Hydraulic Lathe Chuck. This Came Off A Running Machine, And Is In Good Working Condition. The Chuck Will Include A Custom Locator, 1 Set Of Custom Id Jaws, And An A2-11 Spindle Nose Adapter Plate. Thanks For Looking! Serial #184


Lathe Clamp Information

Rohm 3 Jaw Zs 315/3 12-1/2" Centering Manual Lathe Chuck Steel, Set Spare Jaws. Steel Body. Din 55027 With Studs And Lock-nuts. Centering Manual Lathe Chuck Steel. Includes A Set Spare Jaws. Gear Hobs, Lathe Chucks. Mountstud & Lock Nut. Max Total Clamping Force Kn69. Materialsteel Body.

Kitagawa B-206 3 Jaw Lathe Chuck

This 3-jaw Chuck Is In Great Condition With Minor Surface Blemishes.

Km Systems Km50ncmss40125 Clamp,lathe Km50 Rnd Shank D2-1/2x5.59

Clamp.

Value Collection 3 Jaws, 10" Diam, Self Centering Manual Lathe Chuck

Value Collection 3 Jaws, 10" Diam, Self Centering Manual Lathe Chuck Adjustable, Reversible, 2.835" Through Hole Diam, Cast Iron

Steady Rest Turning Lathe 12" Hole Leblond Makino Lion Okuma Daewoo Mori Haas

In Good Used Shape, Does Show Normal Wear.

Microcentric 4-120 Lathe Chuck With Inbuilt Air Cylinder, 4" Dia

Inbuilt Air Cylinder. Chuck Was Used For A Small Production Run And Then It Sat On A Shelf For Ten Years. Reassembled With All New Seals And Oiled By A Qualified Chuck Service Man. Pneumatic Chuck.

Bison 3 Jaws, 6" Diam, Self Centering Manual Lathe Chuck. Bison 3 Jaws, 6" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 3,500 Max Rpm, 1.654" Through Hole Diam, Forged Steel

Km Systems Km40ncmef Clamp,lathe Km40 Ncm Xflngmnt Height:2. Clamp.

5c Fixture Mount Precision Lathe Face Plate's, (1) Lot One Price!!!😀 (hardinge)

20 To 40yr. Old Tooling, Steel 5c Fixture Mount's, These Were Manufactured Before We Started Being Inundated By Junk, All Ground Shank's! Mfg. Japan, 2pc. Mfg. Taiwan, 6pc. Japan, (1) 1 X 5, (2) 1 X 4 Taiwan, (2) 1 X 3, (2) 1 X 2, (1) 2 X 3" Dia.

New Howa Lathe Chuck H011mb, 6" 3 Jaw Draw Down (pull Back) Power Chuck

New, Never Used. Serch Words Everything In Pictures Included.

Km Systems Km50ncmss32125 Clamp,lathe Km50 Rnd Shank D2.0x1.25

Clamp.

Km Systems Km32ncm3225 Clamp,lathe Km32 Ncm Sq Shank 1.562 X

Clamp.

Samchully Mh-210vi 3 Jaw Lathe Chuck, M85 P2 Thread A2-6 (kitagawa Bb-210) . Samchully 3 Jaw Power Lathe Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M85 Thread If You. M 85 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

34-703-9 Self-centering 12" Lathe Chuck. 6-jaw, Self-centering, Plain Back, Scroll Lathe Chuck. 1 Chuck Wrench. 2-piece Reversable Jaws Are Hardened And Precision Ground. 1 Set Of Two-piece Hardened Reversable Jaws. 3.257" Thru Hole.

Kitagawa B-8 3 Jaw Lathe Chuck, M55 P1.5 Thread A2-6

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M55 P 2.0 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. A2-6 Spindle Adaptor Plate.

Btc 16" 4 Jaw D1-6 Independent Lathe Chuck 2 Piece Jaws Reversible

16" 4-jaw D1-6 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

Kitagawa Bb-208 Lathe Chuck, M72 P1.5 Thread A2-6. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M72 Thread If You. M 72 P1.5 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Km Systems Km50clavvdi5080 Clamp,lathe Km50 Km-loc Vdi Axial M. Clamp.

Kitagawa B-208 3 Jaw Lathe Chuck, M60 P1.5 Thread A2-6 (samchully Hs-08) . Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M60 P 1.5 Thread If You. M 60 P1.5 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

New Kitagawa Lathe Chuck B 210x, 10" 3 Jaw, A2-8, M88x2.0 Thread. New, Never Used, Was Taken Off New Mazak Lathe And Replaced By 12" Chuck. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M88 Thread If You.

Rebuilt Kitagawa F1768h Hydraulic Cylinder Actuator For Cnc Lathe Chuck

I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. Cylinder Had A Complete Rebuild Consisting Of (40 Kgfcm Squared).

Smw Autoblok 175 Bb D (inch Serration) 6.88" Lathe Chuck, 3 Jaw Power Chuck . Smw Autoblok 175 Bb D, 6.88" Lathe Chuck, 3 Jaw Power Chuck. Chuck Was Never Used, Was Removed Off Lathe And Replaced By A Special Chuck. 6.88" O.d. (175 Mm). M54 P 1.5 Drawtube Thread Nut.

Km Systems Km40ncmss32100 Clamp,lathe Km40 Rnd Shank D2.0x1.0. Clamp.

Kitagawa Hjd6-10-1a 3 Jaw Power Lathe Chuck With D1-6 Spindle Adapter Cam Lock. With D1-6 Cam Lock Spindle Adaptor. Reassembled And Greased By A Qualified Chuck Service Man. Ready To Run. Excellent Condition.

New Kitagawa N-08 Three Jaw Lathe Chuck, A2-6 (n 8). Chuck Was Removed From A New Machine And Replaced With A Special Chuck. With A2-6 Spindle Adaptor Plate. New Chuck, Never Used. 210 Mm (8.27") O.d.

34-688-2 Self-centering 15" Lathe Chuck D1-8

3-jaw, Self-centering, Direct Mounting "d" Series Lathe Chuck. To Fit Spindle D1-8. Features Include.

Km Systems Km40ncmss28100 Clamp,lathe Km40 Rnd Shank D1-3/4x1.00

Clamp.

New Sca Sweden 10" 4-jaw Independent Lathe Chuck D6 D1-6 Direct Mount $1805 List

Nos Sca Sweden 10" 4-jaw Independent Lathe Chuck. D6 D1-6 Direct Mount. Part Number Hd50610d6. Made In Sweden. A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. The Unit Is Shiny And New But We Had A Hard Time Getting The Light Right . Please See Additional Pictures Below The Description.

New Kitagawa B-206 3 Jaw Lathe Chuck, M55 P2.0 Thread, A2-5

Model B 206. Chuck Was Taken Off A New Machine And Replaced By A Special Chuck. A2-5 Spindle Adapter Plate. M 55 P 2.0 Draw Tube Nut Thread.

Okuma 12 Position Turret Assembly Removed From 1990 Okuma Lb25 Cnc Lathe | 4565. Manufactured By Okuma Machinery Works Ltd., Nagoya, Japan. Type 12 Station Block Type Turret. Manufactured 1990.

Kitagawa B-04 3 Jaw Lathe Chuck

Reassembled And Greased By A Qualified Chuck Service Man. 21 Mm Through Hole. 110 Mm (4.33") O.d.

12 Inch Smw 320-te 2+2+2 (6 Jaw) Hydraulic Lathe Chuck. 12 Inch Smw Autoblok Tx-rv Hydraulic Lathe Chuck. This Came Off A Running Machine, And Is In Good Working Condition. This Style Is A 6 Jaw Centralizing Design, Very Good For Maintaining A Tight Roundness Tolerance. The Chuck Will Include A Custom Locator, 1 Set Of Custom Id Jaws (looks Like They Hold About 7.5" Diameter) And An A2-11 Spindle Nose Adapter Plate. Thanks For Looking! Serial# 21

New Kitagawa Lathe Chuck Bb206, M60 P1.5 Thread, A2-5 (samchully Mh-206)

M60 X 1.5 Drawtube Adapter Nut. A2-5 Spindle Adapter.

Auto Strong Lathe Chuck N-204, 4" 3 Jaw Power Chuck (kitagawa B 204)

Strong Lathe Chuck N-204, 4" 3 Jaw Power Chuck. Chuck Was Never Used, Was Removed Off Lathe And Replaced By A Special Chuck.

10" Itw Woodworth 4 Jaw Ball Lock Power Lathe Chuck. Approximate Weight 80 Lbs. This Part Was Pulled From A Working Machine, And Is Being Sold In Good Working Condition Unless Otherwise Stated! This Part Was Pulled From A Working Machine. We Have No Way Of Testing It.

Lmc Mmk 8" Lathe Three Jaw Chuck Za6-8-52-24g

Jaw "lift Was Checked At. 0008", New Chuck Specifications Is. 0005", So There Is Little Wear. A2-6 Spindle Adaptor Plate Included. Reassembled And Greased By A Qualified Chuck Service Man. M55 P1.5 Drawtube Nut On Chuck.

New Howa Hydraulic Cylinder Actuator For Lathe Power Chuck Hh11c 125



Km Systems Km50ecms40 Clamp,lathe Km50 Rndshank 6.737mm Offset

Clamp.

Km Systems Km50cl2nsbc4010b Clamp,lathe Km50 Loc2 Side Acc Boring C. Clamp.

New Seoam Cah-06 Lathe Chuck, M52 P 1.5 Thread (kitagawa B-206)

Seoam Lathe Chuck Cah-06, 6" 3 Jaw Power Chuck, New, Never Used. Seoam Is Owned By Hwacheon Machine Tool Which Produces Quality Cnc Lathes. For Usa Dealer And Tech Support On Seoam Chucks M52 P1.5 Drawtube Nut Thread Size.

New Schunk Lathe Chuck Rota Ncd 185-54, 3 Jaw Power Chuck, A2-6

1.50mm X 60 Degree Master Jaw Serrations. Chuck Was Removed From New Machine And Replaced With A Special Chuck. A2-6 Spindle Adapter.

Km Systems Km80ncmf Clamp,lathe Km80 Ncm Xflngmnt Height:1. Clamp.

New Sca Sweden 10" 2pc Jaw Forged Steel 3-jaw Lathe Chuck L-0 L0 Back $2911. This Sale Is For New Sca 10" 2pc Jaw 3-jaw Precision Lathe Chuck. Direct Mount Low Profile L0 Back. Part Number 8310l0. Made In Sweden. A Beautiful Tool Featuring The Finest European Craftsmanship , And Materials . Comes Covered In Protective Packing Grease , Easily Cleaned Off With Some Solvent To Reveal Beautifully Machined And Ground Steel Body, And Hardened Pinion, Scroll And Jaws. $2911 List.

Bison 6 Jaws, 6" Diam, Self Centering Manual Lathe Chuck. Bison 6 Jaws, 6" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 2,500 Max Rpm, 1.654" Through Hole Diam, Forged Steel

New Kitagawa Y1230re25 Hydraulic Cylinder Actuator For Cnc Lathe (y1225re). This Cylinder Is Interchangeable With Y1225re And Y1225r. The Only Difference Is This Cylinder Has 30mm Stroke And The Y1225re Has 25mm Stroke.

Matsumoto Mmk Ha-5-6 Hydraulic 6" Lathe 3 Jaw Cnc Chuck Hitachi Seki A-5 42mm. 6" Hydraulic Chuck A-5 Mount.

Mori Seiki A651-06-p 6" Diameter Production Turning Cnc Pie Jaws Chuck For Lathe.

New Sca Sweden 12" 3-jaw Lathe Chuck. A1-8 A8 Direct Mount. 2pc Reversible Jaws

New Sca Sweden 12" 3-jaw Lathe Chuck. A1-8 A8 Direct Mount. 2pc Reversible Jaws. Made In Sweden . The Chuck Is Shiny And New But Covered In Packing Grease A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. Premium Quality. Please See Additional Pictures Below The Description.

New Kitagawa N-10 Three Jaw Lathe Chuck, A2-8 . Chuck Was Removed From A New Machine And Replaced With A Special Chuck. With A2-8 Spindle Adaptor Plate. New Chuck, Never Used.

Km Systems Km50ncmef Clamp,lathe Km50 Ncm Xflngmnt Height:3. Clamp.

Woodworth Ubl-8 Compensating 3 Jaw Lathe Chuck 8" Pull Down Chuck

Soul-woodworth Ubl 8 3 Jaw Compensating Lathe Chuck. Photo Six Shows Chuck Set Up For Non Rocking Jaws (jaw Blocks In Place). Photo Seven Shows Chuck Set Up For Rocking Jaws ( Jaw Blocks Removed). Non Rocking Jaws Are Used With One Gripper In Center Of Jaw Insert.

Bison 3 Jaws, 8" Diam, Self Centering Manual Lathe Chuck. Bison 3 Jaws, 8" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 3,100 Max Rpm, 2.165" Through Hole Diam, Forged Steel

8" Bison 3 Jaw Lathe Chuck Direct Mount D1-4 Spindle

Whether Scroll, Independent Or Collet, These Chucks Have Been Replacing The Competitions For The Last 30 Years Without Sacrificing Production. 8" Bison 3 Jaw Self Centering. Precision, Three Jaw Scroll Lathe Chucks.

Samchully Mh-210vi 3 Jaw Lathe Chuck, M90 P2 Thread A2-8 (kitagawa Bb-210). Samchully 3 Jaw Power Lathe Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M90 Thread If You. M 90 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Tmx 7-864-0600, 3 Jaw Self Centering Manual Lathe Chuck 160mm Outer Diameter

Manufacturer Tmx. Tmx Item Number 7-864-0600. Number Of Jaw Pieces One-piece. Chuck Type Self-centering. Nominal Chuck Size 6. Body Material Cast Iron (semi-steel). Maximum Rpm 3600.

New Sca Sweden 12" 4-jaw Independent Lathe Chuck. L0 L-0 Direct Mount Back

Nos Sca Sweden 12" 4-jaw Independent Lathe Chuck. L0 Back. Part Number Hd50611l0. $1825 List. . The Chuck Is Shiny And New But We Could Not Get The Lighting Right. A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. Premium Quality. Please See Additional Pictures Below The Description.

New Kitagawa Lathe Chuck Bb206, M60 P2.0 Thread, A2-5 (samchully Mh-206)

M60 X 2.0 Drawtube Adapter Nut. A2-5 Spindle Adapter. New, Never Used, Was Taken Off New Machine And Replaced By Special Chuck.

Kitagawa B-210 3 Jaw Lathe Chuck, M60 P2 Thread A2-6 (samchully Hs-10)

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M60 Thread If You. M 60 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Km Systems Km50cl2sr1675d Clamp,lathe Km50 Loc2 1x1 Sq Shank Repl. Clamp.

New Bison 12" 3-jaw Steel Lathe Scroll Chuck. D11 D-11 Direct Mount $3148 List. New Bison 12" 3-jaw Steel Lathe Scroll Chuck. D11 Direct Mount. Bison Part Number 3545-12"-11. Made In Poland D Type Direct Mount - No Need For Machining And No Backplate Required Designed To Grip Round Work Pieces All Forged Steel Bodies 2pc Hard Reversible American Standard Tongue And Groove Jaws Are Made Of High Quality Alloy Then Hardened And Ground Operating Screws Are Hardened And Ground Please See Additional Pictures Below The Description.

Km Systems Km40ecms32 Clamp,lathe Km40 Rndshank 5.390mm Offset

Clamp.

Rebuilt Kitagawa F1768hs-15y Hydraulic Cylinder Actuator For Cnc Lathe Chuck

I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. Cylinder Had A Complete Rebuild Consisting Of (40 Kgfcm Squared).

New Kitagawa N-05 Lathe Chuck, 5" 3 Jaw Power Chuck. Everything In Pictures Included.

Samchully Sh-10036scdb Hydraulic Cylinder Actuator For Lathe Power Chuck. Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder. Smw Autoblok Cylinder. Lmc Cylinder.

Smw Autoblok 120/46 Vsn Hydraulic Cylinder Actuator For Lathe Chuck 33094314

Part Number 33094314. Smw Autoblok 12046 Vsn Hydraulic Cylinder For Cnc Lathe Chuck. Cylinder Has Low Hours On It Was Removed Off Lathe When Functioning And. Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder.

New Kitagawa Lathe Chuck B-205y, 5" 3 Jaw Power Chuck, A2-5 (samchully Hs 05). B-205, B205. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck. A2-5 Spindle Adapter. Removing Ejector Rod And Boring Out Center.

Km Systems Km80ncmef Clamp,lathe Km80 Ncm Xflngmnt Height:5

Clamp.

Km Systems Km63cl2nsef Clamp,lathe Km63 Loc2 Side Acc Extended

Clamp.

New Kitagawa Lathe Chuck Bb-208, 8" M72 P1.5 Thread, A2-6 (samchully Mh 08). M72 P1.5 Thread In Draw Tube Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M72 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Smw Omnirest Em2.1 .78 To 3.93 Cap. Good Used Steady Rest From Mazak Cnc Lathe. Smw Em2.1 Omnirest Turn Through Hydraulic Steady Rest. Had Been Used On Mazak Cnc Lathe, We Do Not Have The Mounting Plate. Approx 70 Lbs.

Watchmakers Lathe. By G Boley 8mm. Original Box. Numerous Collets And Parts. By G Boley 8mm. Original Box.

Hardinge Vernon Bridgeport Collets B 3, 2 Vb, V Jig Boring Lathe Mill Gorten

My Strange Collets Ugh If You Don't See It Ask I Have Lots And Lots And. I Am Not Cleaning Anything Any More. All This Stuff Has Been Sitting On My Garage Since My Dad Got Sick I Am Guessing 11 Years Or More Now.

Howa Hydraulic Cylinder Actuator For Lathe Power Chuck C1sa125 . Cylinder Has Low Hours On It. Was Taken Off A Almost New Machine And Replaced.

New Kitagawa Lathe Chuck Bb210, A2-8, M90 P2 Thread

M90 P2.0 Drawtube Adapter Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M90 Thread If You. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck.

Km Systems Km40ncmss4025 Clamp,lathe Km40 Rnd Shank D40x110mm

Clamp.

New Howa 8" Lathe Chuck H037m8, Blank Drawtube Nut, Flat Back. Howa Cnc Lathe Chuck H037m8, 8" 3 Jaw Power Chuck, New, Never Used. Blank Draw Tube Nut. Flat Back, Ready To Mount Spindle Adaptor Plate.

New Samchully Hs-06 Lathe Chuck, M52 P 1.5 Thread, A2-5 (kitagawa B-206)

Samchully Lathe Chuck Hs-06, 6" 3 Jaw Power Chuck, New, Never Used. M52 P1.5 Drawtube Nut Thread Size. A2-5 Spindle Adapter.

Mmk 8" Lathe Chuck Za6-8-52 24, M60 P1.5, A2-6

Mmk 3 Jaw Power Lathe Chuck. M 60 P1.5 Draw Tube Nut Thread. A2-6 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man. 52 Mm I.d. (2.05"). Model Za6-8-52 24. 210 Mm (8.26") O.d.

Kitagawa B-208 3 Jaw Lathe Chuck, M60 P1.5 Thread A2-6 (samchully Hs-08). Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M60 P 1.5 Thread If You. M 60 P1.5 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Kitagawa Bt-210 Two Jaw Lathe Chuck, M78 P2 Thread A2-8 (samchully Hst 10). Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M78 Thread If You. M 78 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

New Kitagawa N-06 Three Jaw Lathe Chuck, (n 6)

Chuck Was Removed From A New Machine And Replaced With A Special Chuck. New Chuck, Never Used. 165 Mm (6.50") O.d.

Rebuilt Kitagawa S1875-21 Hydraulic Cylinder Actuator For Cnc Lathe Chuck(s1875). This Cylinder Is Interchangeable With The S1875. I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. (40 Kgfcm Squared). Cylinder Had A Complete Rebuild Consisting Of.

Value Collection 3 Jaws, 8" Diam, Self Centering Manual Lathe Chuck

Value Collection 3 Jaws, 8" Diam, Self Centering Manual Lathe Chuck Adjustable, Reversible, 2.264" Through Hole Diam, Cast Iron

Km Systems Km40ncm3228 Clamp,lathe Km40 Ncm Sq Shank 1-3/4 X

Clamp.

Kitagawa 10" Three-jaw Cnc Lathe Power Chuck W/ A2-8 Mount - #hja8-10. This Is A 10" Three-jaw Cnc Lathe Power Chuck W A2-8 Mount. Chuck Thickness 87mm. Draw Tube Threads M45 X P1.5. Mount A2-8. Through Hole 34mm.

Value Collection 1/2 To 2" Face Diam, Expanding Lathe Mandrel Set

Value Collection 12 To 2" Face Diam, Expanding Lathe Mandrel Set 12 To 2" Grip, 8 Pieces

New Kitagawa Lathe Chuck B 206, 6" 3 Jaw, A2-5 (samchully Hs 06) M55x1.5 Thread

A2-5 Spindle Adapter. New, Never Used, Was Taken Off New Machine And Replaced By Special Chuck.

New Kitagawa Y1225re47 Hydraulic Cylinder Actuator For Cnc Lathe

Cylinder Was Taken Off New Lathe And Replaced With Special Cylinder.

Km Systems Km32ncmss20100 Clamp,lathe Km32 Rnd Shank D1-1/4x1.0. Clamp.

Sandvik 5728883 C6-rc2065-00095-40 Cyl Shank Rt Hand Clamping Unit 2-1/2 Dia

System Size Workpiece Side C6. Shank Type Cylindrical Shank With 3-flat X Coromant Capto. Shank Length 4.72 In. Includes 5723097 Torque Wrench, 5758519 Screw, 5758546 Screw, 5759074 Plain Bearing, 5759081 Plug, 5762217 Sleeve, 5762721 Cam Shaft, 5762964 Draw Bar Set, 5763177 Screw, 5763443 Locking Washer, 5763759 Compression Spring, 5763877 Bush, 5763907 Plain Bearing, 5764082 Key Extension And 6630456 Parallel Pin.

Mori-seiki Mr 2000 Lathe Chuck, 3-jaw Self Centering, 12"

12" 3-jaw Self Centering Lathe Chuck. Used, Very Goodcondition. A2-6 Mounting. 2 Piece Steeljaws. Steel Body. Heavy Duty.wason Mori Seiki Mr 2000 Engine Lathe.free Shipping. Continental Usa Only.

Km Systems Km32ncmf Clamp,lathe Km32 Ncm Xflngmnt Height:7. Clamp.

Btc 12" 4 Jaw D1-6 Independent Lathe Chuck 2 Piece Jaws Reversible

12" 4-jaw D1-6 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

Km Systems Lathe Clamping Unit Km40cl2sl1660d

The Product Image Is The Actual Item You Will Receive Including All Contents Unless Otherwise Noted. We Will Take Care Of You! We Are Not An Authorized Dealer Of This Product. This Product Has No Manufacturers Warranty.

Smw-autoblok Tsf-c 315 (12.4") Three Jaw Lathe Chuck, Pull Back Action.

Smw-autoblok Tsf-c 315 (12.4") Three Jaw Chuck, Pull Back Action. Pull Down Three Jaw Chuck. Model Tsf-c 315. Reassembled And Greased By A Qualified Chuck Service Man.

Royal 1/8" To 2 1/4" Heavy Duty Cnc Lathe Bar Puller W/ 1-1/4" Shank - #43402.

New Kitagawa Lathe Chuck B 206, 6" 3 Jaw, A2-5 (samchully Hs 06) M42x1.5 Thread

A2-5 Spindle Adapter. New, Never Used.

Kitagawa Hy1225k Hydraulic Cylinder Actuator For Cnc Lathe



Steady Rest Turning Lathe 10" Hole Leblond Makino Lion Okuma Daewoo Mori Haas

In Good Used Shape, Does Show Normal Wear.

New Smw Autoblok 250 Bb Lathe Chuck, M85 P2 Thread (kitagawa B 210)

Smw Autoblok Lathe Chuck 200 Bb (200 Bbm), 10" 3 Jaw Power Chuck. M85 P2.0 Drawtube Adapter Nut. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck. 1.50mm X 60 Degree Master Jaw Serrations.

Lmc Pc-8-52-01-a5 3 Jaw Lathe Chuck, M60 P1.5 Thread A2-5 . Lmc 3 Jaw Power Lathe Chuck. M 60 P1.5 Draw Tube Nut Thread. A2-5 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man. 52 Mm I.d. (2.05").

Km Systems Km63ncmss40162 Clamp,lathe Km63 Rnd Shank D2-1/2x1.62

Clamp.

Samchully Syh-1869cc-k Hydraulic Cylinder Actuator For Cnc Lathe Chuck. Samchully Hydraulic Cylinder. Cylinder Has Low Hours On It Was Removed Off Lathe When Functioning And. Seom Hydraulic Cylinder. Also Cylinder Was Taken Apart, Seals Replaced And Inspected, Assembled And Tested For Function.

Kitagawa B-208 8" Hydraulic Power Chuck 3-jaw Lathe Chuck.

Kitagawa N-15 15" 3 Jaw Lathe Chuck, A2-11 Spindle Mount.. A2-11 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man. Ready To Run.

Btc 10" 4 Jaw D1-5 Independent Lathe Chuck 2 Piece Jaws Reversible . 10" 4-jaw D1-5 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

Bison 3 Jaws, 10" Diam, Self Centering Manual Lathe Chuck

Bison 3 Jaws, 10" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 2,700 Max Rpm, 2.992" Through Hole Diam, Forged Steel

Cushman20"3 Jaw Hydraulic Lathe Chuck Chuck20-74618-a11a W/backing Plate Unused

Appears Unused Still Has Factory Cosmoline All Over Please See Pics For Condition Local Pickup Or Your Arranged And Paid Shipping

Matsumoto 12" 3-jaw Hydraulic Lathe Chuck Ha11-iii-313.

Schunk Rota Thon Plus 165-43 Lathe Chuck 100733

Used In Good Condition. Used Surplus. See Photos .

Mmk (matsumoto) Zkv 125/42-15 Hydraulic Cylinder Actuator For Lathe Power Chuck

Removed From A New Lathe And Replaced With Special Cylinder. Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder. Cylinder Is In New Condition, Never Used. M45 P 1.50 Draw Tube Id Thread.

Kitagawa B-10 3 Jaw Lathe Chuck, M75 P2 Thread A2-8

Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M75 Thread If You. M 75 P2.0 Draw Tube Nut Thread. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

New Yama Taiwan 12" 4-jaw Independent Lathe Chuck. Flat Back

New Yama 12" 4-jaw Independent Lathe Chuck. Flat Back. Made In Taiwan.

Speedgrip Double Taper Id Collet Lathe Chuck Dtns-2.5-db4 With A2-6 Spindle. Dtns-2.5-db4 Standard Double Taper Chuck Assembly. 180-17 Collet For 2.010" Part Id. C 6a4 Dt Chuck Spindle Adaptor Body. (6.375" Dia.). B-39333-2 Draw Tube Adaptor With M72 P2 Thread.

Bison 6 Jaws, 10" Diam, Self Centering Manual Lathe Chuck. Bison 6 Jaws, 10" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 1,900 Max Rpm, 2.992" Through Hole Diam, Forged Steel

Km Systems Km40ncmf Clamp,lathe Km40 Ncm Xflngmnt Height:1. Clamp.

New Kitagawa Lathe Chuck B 210x, 10" 3 Jaw, A2-8, M88x2.0 Thread

New Kitagawa Lathe Chuck B 210x, 10" 3 Jaw, A2-8, M88x2.0 Thread.

New Seoam Cah-05 Lathe Chuck, 5" 3 Jaw Power Chuck, A2-4 (kitagawa B-205)

Seoam Lathe Chuck Cah-05, 5" 3 Jaw Power Chuck, New. Seoam Is Owned By Hwacheon Machine Tool Which Produces Quality Cnc Lathes. For Usa Dealer And Tech Support On Seoam Chucks A2-4 Spindle Adaptor Plate.

Km Systems Km50ncms32 Clamp,lathe Km50 Rnd Shank D50.8x304.8

Clamp.

Abbott Workholding Products Ktt8hjds Lathe Jaw,m12,steel. Abbott Workholding Products Ktt8hjds. Lathe Jaw,m12,steel. Parker 34-16 Fhg5-s Straight, Steel, 34 X 1 In,mnpt X F Sae. Jurisdictions Have Varying Laws, Codes And Regulations Governing Construction, Installation, Andor Use Of Products For A Particular Purpose.

Km Systems Km40ncmss24100 Clamp,lathe Km40 Rnd Shank D1-1/2x4.33. Clamp.

12 Inch Smw Tx-rv Hydraulic Lathe Chuck

12 Inch Smw Autoblok Tx-rv Hydraulic Lathe Chuck. This Came Off A Running Machine, And Is In Good Working Condition. The Chuck Will Include A Custom Locator, 1 Set Of Custom Id Jaws, And An A2-11 Spindle Nose Adapter Plate. Thanks For Looking! Serial #178

Samchully Sh-15052 Cc-du Hydraulic Cylinder Actuator For Lathe Power Chuck

Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder. Smw Autoblok Cylinder. Lmc Cylinder.

Kitagawa B-206 3 Jaw Lathe Chuck, M45 P1.5 Thread, A2-5

Model B 206. A2-5 Spindle Adapter Plate. M 45 P 1.5 Draw Tube Nut Thread. Reassembled And Greased By A Qualified Chuck Service Man.

Km Systems Km40cl2sr1660d Clamp,lathe Km40 2 1 Sq Shank Replacem. Clamp.

New Seoam Cah-06n Lathe Chuck, M52 X 1.5 Thread, A2-5 (kitagawa B-206)

Seoam Lathe Chuck Cah-06n, 6" 3 Jaw Power Chuck, New, Never Used. Seoam Is Owned By Hwacheon Machine Tool Which Produces Quality Cnc Lathes. For Usa Dealer And Tech Support On Seoam Chucks M52 P1.5 Drawtube Nut Thread Size.

Km Systems Km40clavvdi4070 Clamp,lathe Km40 Km-loc Vdi Axial M

Clamp.

New! Delta 46-460 12-1/2 In. Variable Speed Midi-lathe!!

Delta 46-460 12-12 In. Variable Speed Midi-lathe! Variable Speed Midi-lathe. Type Wood Lathe. Forward And Reversing Function Allows The Turner To Achieve A Superior Finish. With The Delta 46-460 It Is A Simple Flip Of The Switch.

New Kitagawa Lathe Chuck B 210x, 10" 3 Jaw, A2-8, M88x2.0 Thread. New, Never Used, Was Taken Off New Mazak Lathe And Replaced By 12" Chuck. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M88 Thread If You.

Km Systems Km32ncmss24100 Clamp,lathe Km32 Rnd Shank D1-1/2x1.0

Clamp.

Id 3-1/2" Gripping Lathe Nose Mandrel W/ D1-6 Mount & 4" Mandrel. Cnc Lathe Turning Centers. Id 3-12" Gripping Lathe Nose Mandrel. Id Gripping Capacities 3.5" & 4". Press Brakes. Mount D1-6. We Can Setup Ltl Or Dedicated Trucking Loads For At The Most Competitive Prices.

New Sca Sweden 2pc Jaw Steel 10" 3-jaw Precision Lathe Chuck D1-5 Back $2733. New Sca 10" Steel 3-jaw Lathe Chuck. D5 Back. Part Number 8310 D5. Made In Sweden This Sale Is For New Sca 10" 3-jaw Lathe Chuck. D1-5 Direct Mount Back. . Made In Sweden. A Beautiful Tool Featuring The Finest European Craftsmanship , And Materials . Comes Covered In Protective Packing Grease , Easily Cleaned Off With Some Solvent To Reveal Beautifully Machined And Ground Steel Body And Hardened Pinions, Scroll And Jaws. $2733 Usd List.

Buck-forkardt 10" 2-3 Jaw Power Lathe Chuck, New Chuck

Parts Available Through Buck Chuck. A2-8 Spindle Adapter Plate. New Chuck, Never Used.

New Bison Poland 12" 4-jaw Independent Steel Lathe Chuck. A2-8 Mount $3435

New Bison Poland 12" 4-jaw Independent Steel Lathe Chuck. A2-8 Mount 4-jaw (2 Pc) Forged Steel 12 A-8, 3.15 Hole Please See Additional Pictures Below The Description.

Just Template - 6" 4 Jaw Plain Back Self-centering Lathe Chuck 4-jaw. 4 Jaw Plain Back Self-centering Chuck. 6" 4-jaw Plain Back Self-centering Chuck. Chuck Dia 6". Lathe Chucks. Gage Blocks & Parallels. Working Directly With Our Manufacturers, We Are Able To Pass The Savings Directly To You.

Bison 6 Jaws, 8" Diam, Self Centering Manual Lathe Chuck. Bison 6 Jaws, 8" Diam, Self Centering Manual Lathe Chuck Front Mount, Adjustable, Reversible, 2,200 Max Rpm, 2.165" Through Hole Diam, Forged Steel

Btc 14" 4 Jaw D1-8 Independent Lathe Chuck 2 Piece Jaws Reversible . 14" 4-jaw D1-8 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

New Buck A4010 Super Life Power Lathe Chuck, 10" Dia. A2-8 Mount. New Buck A4010 Super Life Power Lathe Chuck, 10" Dia. Complete With A2-8 Spindle Plate Mount. Chuck Is Still Available Through Hardinge.

Atlas Atl10-a6 3 Jaw Lathe Chuck, A2-6, M72 P1.5 Thread (same As Kitagawa B 210)

M72 X P 1.5 Drawtube Nut. Chuck Was Removed Off A New Lathe And Replaced By A Special Chuck. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. A2-6 Spindle Adaptor Plate.

New Sca Sweden Heavy Duty 12" 4-jaw Independent Lathe Chuck. L0 L-0 Back

New Sca Sweden 12" 4-jaw Independent Lathe Chuck. L0 Back. $1825 List. . The Chuck Is Shiny And New But We Could Not Get The Lighting Right. A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. Premium Quality. Please See Additional Pictures Below The Description.

New Bison Poland 12" 4-jaw Independent Steel Lathe Chuck Plain Back $2994. New Bison Poland 12" 4-jaw Independent Forged Steel Lathe Chuck. Plain Back. 2 Pc Top Jaws. Part Number 4307-12 Please See Additional Pictures Below The Description.

Kitagawa Ss2110c15y Hydraulic Cylinder Chuck Actuator For Cnc Lathe

Compact Hydraulic Cylinder With Max Speed Of 3500 Rpm. Draw Bar Pull (kn) 71.0. Max Pressure (mpa) 3.5.

Kitagawa B-12 3 Jaw Lathe Chuck, M75 P2, A2-8 Spindle Mount.

M 75 P2.0 Draw Tube Nut Thread. A2-8 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man.

New Kitagawa Lathe Chuck B-205y, (b205) M40x1.5 Thread, A2-5 (samchully Hs 05)

Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Chuck Was Removed Off A New Machine And Replaced With A Special Chuck. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M40 Thread If You.

Tonfou (ton Fou) Rcs-10 Hydraulic Cylinder Actuator For Lathe Power Chuck

Samchully Hydraulic Cylinder. Seom Hydraulic Cylinder. Smw Autoblok Cylinder. Lmc Cylinder. Complete With Everything In Photos, No Box.

Pratt Burnerd 12" 2-jaw Lathe Chuck

Refurbished Lj#2105.

12 Inch Smw Tx-rv Hydraulic Lathe Chuck. 12 Inch Smw Autoblok Tx-rv Hydraulic Lathe Chuck. This Came Off A Running Machine, And Is In Good Working Condition. The Chuck Will Include A Custom Locator, 1 Set Of Custom Id Jaws, And An A2-11 Spindle Nose Adapter Plate. Thanks For Looking! Serial #184

Smw Autoblok 165 Bh 6.5" 4 Jaw Lathe Chuck, A2-6, M52 P2 Thread

Smw Catalog Page. M52 P 2 Drawtube Thread Nut. 6.50" O.d. (165 Mm). A2-6 Spindle Adaptor. Reassembled And Greased By A Qualified Chuck Service Man. Ready To Run.

Lot Of (2) Smw Autoblok 16” (400mm) 400-nt Hydraulic Lathe Power Chucks

Lot Of (2) Smw 16 400-nt Hydraulic Lathe Power Chucks. These Units Are In Good Condition But Have Some Surface Rust, Wear, And Grime. You Get Both Chucks Pictured With No Other Accessories, Jaws, Or Attachments. They Come Exactly As Seen Pictured. See All Photos To Be Sure Of What Youre Getting And For The Best Idea Of Item Condition. Local Pickup In Woodruff, Sc. I Can Help Facilitate With Freight Shipping.

Km Systems Km40cl2sl1660d Clamp,lathe Km40 2 1 Sq Shank Replacem. Clamp.

New Atlas Workholding Lathe Chuck Atl8-a6, 8" 3 Jaw Chuck (kitagawa B 208)

Pratt Burnerd Atlas Workholding. Blank Drawtube Nut Can Be Machined To Fit Your Lathe Drawtube Thread Size. With A2-6 Spindle Adaptor Plate.

New Sca Made In Sweden 10" 4-jaw Independent Lathe Chuck. Plain Back. $1543

Nos Sca Sweden 10" 4-jaw Independent Lathe Chuck. Plain Back. Part Number Hd50610. Made In Sweden A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. Please See Additional Pictures Below The Description.

Km Systems Km50clnss40316 Clamp,lathe Km50 Km-loc Rnd Shank D63.5. Clamp.

Lot Of (2) Smw 12” 320te 2+2+2 (6 Jaw) Hydraulic Lathe Chucks

Lot Of (2) Smw 12 320te 2+2+2 (6 Jaw) Hydraulic Lathe Chucks. These Units Are In Very Good Condition So The Only Some Minor Surface Rust And Grime. One Was Protected In A Protective Wax And Is Possibly Unused. One Of Them Includes The Mounting Bolts But No Other Accessories Are Included. They Come Exactly As Seen Pictured. See All Photos To Be Sure Of What Youre Getting. Local Pickup In Woodruff, Sc. I Can Help Facilitate With Freight Shipping.

Poland 8" 3-jaw With 2pc Piston Jaws Milling Machine Metal Lathe Chuck Pre Bison

Condition Is Used.

Kennametal Km 32 Modular Tool Holders & Clamping Units Cnc Metal Lathe Tooling. Condition Is Used.

Km Systems Km40cl2nss24236 Clamp,lathe Km40 2 Dia 1 1/2 Straight

Clamp.

Zweifel Reishauer / Alina Lathe Scroll / Bezel Chuck 5c Arbor. Zweifel Reishauer Alina Lathe Scroll Bezel Chuck 5c Arbor. I Have W 20 And W 25 Arbor You Need To Fit Too It

New! Jet 719110 Jwl-1015vs 10"x15" Variable Speed Wood Lathe!!

Manufacturers Part Number 719110. This Sturdy, Smooth-running 15" Mini-lathe Has The Power, Precision And Versatility To Turn Out Any Number Of Projects. When You're Ready To Make Your Ideas A Reality. Start Here.

New Howa Hydraulic Cylinder Actuator For Lathe Power Chuck C1sa125 M-4780



New Sca Sweden 10" 2pc Hard Jaw 3 Jaw Steel Lathe Flat Back Chuck $2580 Retail

New Sca 10" 3 Jaw 2pc Jaw Steel Lathe Chuck. Flat Back. Made In Sweden. A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials.

New Bison Poland 12-1/2" 4-jaw Independent Steel Lathe Chuck. A6 Mount. $3146

New Bison Poland 12-12" 4-jaw Independent Steel Lathe Chuck. A6 Mount. A Beautiful Tool Featuring The Finest European Craftsmanship, And Materials. The Unit Is Shiny And New But We Had A Hard Time Getting The Light Right . Please See Additional Pictures Below The Description. 4-jaw Steel Body Independent Chucks "a" Type Direct Mount with American Standard 2 Pc. Top Jaws Please See Additional Pictures Below The Description.

Km Systems Km50cl2nss32295 Clamp,lathe Km50 Loc2 Dia 2 Rnd Shank

Clamp.

Km Systems Km40rnsef Clamp,lathe Km40 Flngemnt Id Side Access. Clamp.

New Seoam Cah-10 Lathe Chuck, M76 P1.5 Thread A2-8 (kitagawa B-210). Seoam Lathe Chuck Cah-10, 10" 3 Jaw Power Chuck, New, Never Used. Seoam Is Owned By Hwacheon Machine Tool Which Produces Quality Cnc Lathes. For Usa Dealer And Tech Support On Seoam Chucks M76 P1.5 Drawtube Nut Thread Size.

Kitagawa Hydraulic Cylinder Actuator For Lathe Power Chuck M1120hc21d.

Km Systems Km63ncmef Clamp,lathe Km63 Ncm Xflngmnt Height:4

Clamp.

12-1/2 Bison 6 Jaw "set Tru" Lathe Chuck

Whether Scroll, Independent Or Collet, These Chucks Have Been Replacing The Competitions For The Last 30 Years Without Sacrificing Production. 12-12" Bison Chuck 6 Jaw "settru" Fine Adj Lathe Chuck.

New Samchully Lathe Chuck Hs-10, A2-8, M85 P2 Thread, (kitagawa B 210)

Powergrip Samchully Lathe Chuck Hs-10, 10" 3 Jaw Power Chuck, New. M85 P2 Drawtube Nut Thread Size. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe. Chuck Was Removed Of A New Machine And Replaced With A Special Chuck.

New Kitagawa Lathe Chuck Bb08, 8" M74 X P 2.0 Thread, A2-6 (kitagawa Bb208). M74 X P2.0 Thread In Draw Tube Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M74 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Royal Heavy Duty Cnc Lathe Bar Puller Model 43400 1" Round Shank Range 1/8-2 1/4

Royal Heavy Duty Cnc Lathe Bar Puller Model 43400 1" Round Shank Range 18-2 14

Km Systems Km40cl2sr1660c Clamp,lathe Km40 2 1 Sq Shank Replacem. Clamp.

New Kitagawa Lathe Chuck Br08, M74 X P2 Thread, A2-6

M74 P2.0 Drawtube Adapter Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M74 Thread If You. Require, So You Can Machine The Thread Size To Match Your Drawtube On Your Lathe.

Km Systems Km63ncms40 Clamp,lathe Km63 Rnd Shank D63.50x355.. Clamp.

Km Systems Km40rcmivdi4060 Clamp,lathe Km40 Cmi Vdi Axial Rh D40x60

Clamp.

New! Jet 719100 Model Jwl-1015 10"x15" Wood Lathe!!

Manufacturers Part Number 719100. This Sturdy, Smooth-running 15" Mini-lathe Has The Power, Precision And Versatility To Turn Out Any Number Of Projects. When You're Ready To Make Your Ideas A Reality. Start Here.

New Power Grip Hs-06 Lathe Chuck, M52 X P 1.4 Thread, A2-5 (kitagawa B-206)

M52 X P1.5 Drawtube Nut Thread Size. Powergrip (power Grip) Lathe Chuck Hs-06, 6" 3 Jaw Power Chuck, New. Chuck Was Removed Off A New Machine And Replaced By A Special Chuck.

Kitagawa Hoh-6 3 Jaw Counter Balanced Lathe Chuck . Counter Balanced Power Chuck. Reassembled And Greased By A Qualified Chuck Service Man. Drawbar Operated. Ready To Run.

Kitagawa Hoh-7k 3 Jaw Counter Balanced Lathe Chuck, M52 P 1.5 Thread

Chuck Was Taken Off New Lathe And Replaced With A Different Chuck. M 52 P1.50 Draw Tube Nut Thread.

Woodworth Ubl160000 3 Jaw Lathe Chuck 6" Pull Down Chuck

Woodworth Ubl160000 3 Jaw Lathe Chuck. Jaws Provide Pull Back Action Pulling Workpiece Against Part Stop. Reassembled And Greased By A Qualified Chuck Service Man. 58"-11 Drawbar Thread.

A2-8 Lathe Spindle Collet Nose Hardinge S30 Master & (21) Sets Of Collet Pads. Includes Hardinge S30 Cone Master Collet. Hardinge 2-34" Serrated. Hardinge 2-12". Hardinge 1-78". Hardinge 1-34". Hardinge 1-516". Hardinge 1". Hardinge 58".

Rebuilt Kitagawa F1236h-28 Hydraulic Cylinder Actuator For Lathe Chuck (f1236). This Model Will Also Repace The F1236. I Rebuild Chuck Cylinder Actuators. This Cylinder Is As Good As A New Cylinder. (40 Kgfcm Squared). Cylinder Had A Complete Rebuild Consisting Of.

Hardinge Lathe

Made In Usa.

New Bison Poland 10" 2-jaw Scroll Lathe Chuck. 2pc Jaws. Plain Back $939

New Bison Poland 10" 2-jaw Semi-steel Scroll Lathe Chuck. 2pc Jaws. Plain Back. 2-jaw Self-centering Scroll Chucks semi-steel Body two-piece Reversible Tongue And Groove Jaws Am. Std. soft Jaws Are Shaped By User To Fit Work Piece scroll And Master Jaws Hardened And Ground plain Back Please See Additional Pictures Below The Description.

Btc 14" 4 Jaw D1-6 Independent Lathe Chuck 2 Piece Jaws Reversible

14" 4-jaw D1-6 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

Kitagawa Bt10 Two Jaw Lathe Chuck, Blank Drawtube Nut, Thread A2-8

(jaw "lift" In Jaw Slide Was Checked And Was Less Than. 001". Blank Draw Tube Nut Thread. Thread Can Be Machined). A2-8 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man.

Km Systems Km40cl2nsef Clamp,lathe Km40 2 Flange Mount Side

Clamp.

34-689-0 Self-centering 15" Lathe Chuck D1-11. 3-jaw, Self-centering, Direct Mounting "d" Series Lathe Chuck. To Fit Spindle D1-11. Features Include.

New Kitagawa Hydraulic Cylinder Actuator For Lathe Power Chuck M0915ra



Km Systems Km50ncmf Clamp,lathe Km50 Ncm Xflngmnt Height:1. Clamp.

New Kitagawa Lathe Chuck B 206, 6" 3 Jaw, A2-5 (samchully Hs 06) M42x1.5 Thread. A2-5 Spindle Adapter. New, Never Used, Was Taken Off New Machine And Replaced By Special Chuck.

Kitagawa Nlt08 2 Jaw Lathe Chuck, A2-6 Spindle Mount.

Model Nlt08. A2-6 Spindle Adaptor Plate. Reassembled And Greased By A Qualified Chuck Service Man. Ready To Run.

Km Systems Km32ncmef Clamp,lathe Km32 Ncm Xflngmnt Height:2. Clamp.

Kitagawa B-206 3 Jaw Lathe Chuck . This 3-jaw Chuck Is In Great Condition With Minor Surface Blemishes.

Btc 10" 4 Jaw D1-4 Independent Lathe Chuck 2 Piece Jaws Reversible

10" 4-jaw D1-4 Cam-lock Independent Lathe Chucks 2 Piece Jaws Reversible. Top Jaws Are Reversible. Lathe Chuck Wrench Supplied. Self Centering Jaws, Hardened And Precision Ground. Direct Mounting Chuck With Camlock Nose.

New Kitagawa Lathe Chuck Bb210, A2-8, M90 P2 Thread. M90 P2.0 Drawtube Adapter Nut. Note Chuck Can Be Supplied With A Blank Drawtube Nut Instead Of The M90 Thread If You. Chuck Was Never Used, It Was Removed Off A New Lathe And Replaced With A Special Chuck.

Gisholt 21” 3 Jaw Manual Lathe Chuck Turning. Gisholt 21 3 Jaw Manual Lathe Chuck. A1-15 Mount. 560 Lbs Condition Is "used". Local Pick Up Welcome, Or We Can Palletize For Shipping.

3x Blin Bwd Ii Cnc Lathe 8 Position Turret 80mm Centerline - Freight Ship

We Don't Know If They Were Installed Or Used But They're Sold As-is In Unknown Condition, They Look To Be In Good Condition. Catalogue Page Information Is Available At Blin's Turret Product Page Blincnc Dot Comproductdetailen413.

Km Systems Km40ncms40s Clamp,lathe Km40 Rnd Shank D40x250.0mm. Clamp.

^^ Powerhold 8.25lh-3-a6fs Drawtube Thrust 6300lbs Chuck For Cnc Lathe (gw11). We Are Quick To Respond And Resolve. We Do Not Have Power Cords To Provide Unless They Are Attached To The Item Or Unless Stated That They Are Provided. If One Is Pictured It Is For Testing Purposes Only Unless It Is Attached Or Stated That It Will Be Included.

You May Also Be Interested In